Already have a chiller or want to DIY your own setup and save some money?
The Desert Plunge Exclusive Tub Only - Chiller Ready gives you our full-size, fully insulated tub with preinstalled chiller ports so you can hook up any chiller. Watch the video at the bottom of this page for a full walkthrough. 

This listing is for the TUB ONLY, equipped with ¾” NPT chiller ready connections and ozone ready hole through the lid. Buy the Desert Plunge Exclusive Cold Plunge with chiller here.

Chiller Connections

• Includes (1) 3/4" MGHT (male garden hose thread) installed on the bottom right hand side of your tub for you chiller intake connection, this will work with NPT (national pipe thread) fittings as well.
• Includes ¾” FNPT bulkhead installed at 20.25” high on the right hand side of your tub for the chiller return.
• Equipped with drain attachment to fit a standard garden hose
• Ozone ready holes located on each back corner of lid

Key Features 

• The Desert Plunge Exclusive is made by Grizzly coolers, designed by and exclusive to Desert Plunge
• 5.5″ longer in the interior than the Wide 450, for increased leg room
• Tub can accommodate 6′ 8″ + tall comfortably
• Injected with 2″ of foam for superior insulation
• Durable rugged tub, great for both indoor and outdoor
• Childproof, lockable lid
• Prop latching lid bracket located on exterior arm of plunge that will hold the lid open while plunging
• Your tub should be placed out of direct sunlight. Pick a location in a garage, under a patio, umbrella, or some type of shaded area.
  

Additional Options

• Ozone sanitation – Don’t want to mess with installing it yourself? Desert Plunge will do it for you. Fully installed JED303 ozone generator mounted on the back right of your plunge with timer and tubing through lid.
• Sirona sanitation

Total footprint – 77” long x 32” deep, add 12” to keep off wall for a total footprint of 77”x44”

Interior cooler dimensions – 47 1/4″ long at top 46″ long at bottom, 24.25″ wide tapered to 23″ wide at feet x 23 7/8″ deep

Exterior cooler dimensions – 62” long x 32” wide x 31 5/8” high, if needing to fit through a narrow doorway, you can remove the lid and turn the plunge on its side, achieving a width of 28”

Shipping Weight: 150 lbs.

Water Volume: 105 gallons filled to the top. Suggested fill level roughly 65-70 gallons

Water Treatment: Ozone

Ozone sanitation is a is a great chemical-free option for keeping your water clean. A generator attaches to the back of your cold plunge tub, releasing ozone into the water daily using an air pump. The ozone generator turns on and off by a timer, making it a hands-off maintenance option. While ozone can be a great sanitation method, you need to ensure you are entering the plunge after rinsing off and wearing swimsuit material only. Ozone is a powerful oxidizing agent which when dissolved in water, produces a broad spectrum biocide that helps eliminate bacteria and viruses; ozone for water treatment has been used since 1904.  See also our Ozone FAQs and check out the video for more information. Please note, if you keep your cold plunge outside in freezing temperatures, ozone tubing will need to be monitored for blockages, and ozone should not be used in temperatures below 20 degrees F.

Water Treatment: Sirona

Our Sirona Water Maintenance Kit is a chlorine free and bromine free product that you’ll add to your cold plunge water based on the results of weekly testing;  testing info and pH strips are included.

The Sirona Water Maintenance Kit is a stronger cleaning agent than ozone; it is ideal if there are a number of people regularly using your cold plunge or if your are not as diligent about rinsing off before getting in the water. See more information about Sirona use and testing on our care and maintenance page.

Shipping options: Free local pickup at our Phoenix metro area warehouse, local delivery in the Phoenix metro for a fee, $260 flat-rate shipping within the continental U.S., and $650 flat-rate delivery to the Hawaiian Islands of Maui, Kauai, Oahu, or Hawaii.

Specs for Exclusive Cold Plunge
Exterior cooler dimensions – 62" long x 32" wide x 31" high, if needing to fit through a narrow doorway, you can remove the lid and turn the plunge on its side, achieving a width of 28"
Comes with pre-drilled holes for ozone. For an additional fee we will drill a hole for a chiller connection.
Shipped weight is 225lbs